Talk
| FORUM | LATEST POST | # TOPICS |
|---|---|---|
|
Engineering 🇬🇧 Discussions about the CODESYS Development System, IEC programming, CODESYS Professional Developer Edition |
Sensor not set by plunje 3 hours ago |
5093 |
|
Runtime 🇬🇧 Related questions to SoftPLCs e.g. Raspberry Pi, Beaglebone, IoT2000 and other platforms |
Raspberry PI change tag only responds after stopping PLC by yofi 3 days ago |
2111 |
|
Visualization 🇬🇧 Realizing operator screens with CODESYS HMI, Targetvisu, Webvisu |
Visual error with cut/shredded texts by robpqs 8 hours ago |
893 |
|
Motion 🇬🇧 Realizing single or multi axis motion control, CAM, CNC and Robotic applications |
Configuring an Encoder by yofi 3 days ago |
441 |
|
Codesys V2.3 🇬🇧 Forum about V2.3 |
Program from one PLC to other WAGO 750-8204 by robpqs 1 day ago |
2162 |
|
Deutsch 🇩🇪 German forum |
Nema 17 Schrittmotor 2.7V kann das sein? by dkugler 2 hours ago |
4449 |
|
Automation Server 🇬🇧 The Industry 4.0 administration platform for users and operators of CODESYS compatible controllers |
File transfer via visu and codesys automation server by eschwellinger 2024-03-11 |
30 |
|
Forge 🇬🇧 Discussions about CODESYS Forge projects and features of the CODESYS Forge website |
MQTT PLC Chat: by ppix 2 days ago |
174 |
Recent Activities
-
dkugler posted a comment on discussion Deutsch 🇩🇪
Ein Schrittmotor muss immer an einem entsprechenden Schrittmotor-Treiber/Kontroller betrieben werden. Mit welcher Spannung dieser Treiber versorgt wird(üblich von 5V bis zu 70/80V DC und mehr) und bei welcher Strangspannung der Nennstrom durch die Motorwicklung fließt, ist ein himmelweiter Unterschied. Genau das ist u.a. die Aufgabe des Treibers, die Spannung so zu regeln, dass die Motorwicklungen von dem aktuell notwendigen Strom durchflossen werden. Siehe https://de.wikipedia.org/wiki/Schrittmotor...
-
plunje posted a comment on discussion Engineering 🇬🇧
Thanks a lot!
-
sigurdrb modified a comment on discussion Engineering 🇬🇧
Hi, I was hoping I could send the two files "application.app" and "application.crc" directly to the directory "/home/codesys/PlcLogic/Application" instead of logging into the device with codesys, downloading the program to the controller and then do the "create boot application", so it will reboot with the correct program running. I think i also need to edit the file "eRUNTIME.cfg" located in the "/home/codesys/ folder, because when I create the boot application from the codesys IDE, these lines...
-
sigurdrb posted a comment on discussion Engineering 🇬🇧
Hi, I was hoping I could send the two files "application.app" and "application.crc" directly to the directory "/home/codesys/PlcLogic/Application" instead of logging into the device with codesys, downloading the program to the controller and then do the "create boot application", so it will reboot with the correct program running. I think i also need to edit the file "eRUNTIME.cfg" located in the "/home/codesys/ folder, because when I create the boot application from the codesys IDE, these lines...
-
damian177 modified a comment on discussion Engineering 🇬🇧
Hi, I am running my application on device based on Compute Module 4S (Cortex-A72 (ARMv8) 64-bit ). On this device I installed RPi Runtime in 4.11.0.0 version. In my project I use device: Codesys Control for Raspberry Pi 64SL and my project works, but I actually do not have acces to all GPIO's , because GPIOs Compute Module is available only in 3.5.16.0 version and it doesn't work. Properly work GPIOs B+/Pi2 but using this device I do not have acces to all GPIO's in CM4S. Anyone of can tell me how...
-
damian177 posted a comment on discussion Engineering 🇬🇧
Hi, I running my application od device based on Compute Module 4S (Cortex-A72 (ARMv8) 64-bit ). On this device I installed RPi Runtime in 4.11.0.0 version. In my project I use device: Codesys Control for Raspberry Pi 64SL and my project works, but I actually do not have acces to all GPIO's , because GPIOs Compute Module is available only in 3.5.16.0 version and it doesn't work. Properly work GPIOs B+/Pi2 but using this device I do not have acces to all GPIO's in CM4S. Anyone of can tell me how add...
-
wollvieh posted a comment on discussion Deutsch 🇩🇪
Steht doch so im Datenblatt, suche halt nach nema17, 24Volt Typen.
-
mike22 posted a comment on discussion Deutsch 🇩🇪
Hallo Zusammen, ich wollte gerade einen Nema 17 Schrittmotor beim oyostepper.de bestellen. Auf der Webseite wird der Motor mit 2.7V angegeben. Das kann doch nicht sein oder? Ich möchte ihn mit 24V betreiben. https://www.oyostepper.de/goods-318-Nema-17-Getriebeschrittmotor-mit-50-1-Planetengetriebe-0036-Grad-168A-27V-39Ncm-Getriebe-Schrittmotor.html Das kann doch nicht sein oder?
-
thisischris modified a comment on discussion Engineering 🇬🇧
Duplicate
-
thisischris posted a comment on discussion Engineering 🇬🇧
Hello. I am a new user. On generating the first test project I am receiving this error message. You are using inconsistent overlay settings, please check your compilerdefines for the current application (-> GENERATE_OVERLAY_VISU) and the setting within the visualization manager. Can anyone help?