rabaggett posted a comment on discussion Engineering 🇬🇧

It is either my installation is bad, or there is a bug. I re-created the project in 3.5 SP19 and there are no errors or warnings. Compiles with no errors or warnings. The original was done in 3.5 SP20. Thoughts?

rabaggett posted a comment on discussion Engineering 🇬🇧

Update: I started over. I saved progress at each step. all compiled zero errors, zero warnings. Pre-processor messages remain, but I can make progress. Until I try to re- load the project file in Codesys. Re-loaded files error as above when compiled, even though they compiled error-free immediately before saving. Is my installation borked? (Not easy to re-install due to IT madness...)

k2saki posted a comment on discussion Motion 🇬🇧

Is it possible like G-Code streaming processing (like FANUC or SIEMENS DNC Function )? Or Does anyone know the tips for CODESYS Motion to start moving long Long G-Code File quickly? I have to wait long time after "Start" button to start moving, I have to wait finishing interpreting whole G-Code file, ( and I have to prepare huge buffer to store. ) Now, I'm working on my CNC Project using SMC_ReadNCFile2, and SMC_NcInterpreter to preprocess G-Code. I tried to set SMC_Interpolator.xExecute to true...

User1997 modified a comment on discussion Engineering 🇬🇧

mxj262 modified a comment on discussion Engineering 🇬🇧

**Guys I am new to codesys. Here the FB MyMovingAvg has a single Input ( nextNum: INT;) However in the main program this FB has been initialized with an ARRAY of INT Is this, Ok? and how will it access the next elements of the Array? ** Will more code will need to be written in the main program to make it able to get rest of the elements of array? Basically this is an example of dynamic memory Could someone explain me how all these work together FUNCTION_BLOCK MyMovingAvg VAR_INPUT nextNum: INT;...

mxj262 modified a comment on discussion Engineering 🇬🇧

**Guys I am new to codesys. Here the FB MyMovingAvg has a single Input ( nextNum: INT;) However in the main program this FB has been initialized with an ARRAY of INT Is this, Ok? and how will it access the next elements of the Array? ** Will more code will need to be written in the main program to make it able to get rest of the elements of array? Basically this is an example of dynamic memory FUNCTION_BLOCK MyMovingAvg VAR_INPUT nextNum: INT; END_VAR VAR_OUTPUT avg: REAL; END_VAR VAR windowPtr:...

mxj262 posted a comment on discussion Engineering 🇬🇧

**Guys I am new to codesys. Here the FB MyMovingAvg has a single Input ( nextNum: INT;) However in the main program this FB has been initialized with an ARRAY of INT Is this, Ok? and how will it access the next elements of the Array? ** Will more code will need to be written in the main program to make it able to get rest of the elements of array? Basically this is an example of dynamic memory FUNCTION_BLOCK MyMovingAvg VAR_INPUT nextNum: INT; END_VAR VAR_OUTPUT avg: REAL; END_VAR VAR windowPtr:...

eschwellinger posted a comment on discussion Engineering 🇬🇧

it is mandatory to activate the OPC DA license into the 32-xxxxxx legacy container (not UFC) you need a remove ticket -> contact CODESYS store - my question to move the license

bryandimino posted a comment on discussion Engineering 🇬🇧

Additionally the license is loaded on the soft storage for my device but it shows up as invalid. I just activated it today.

bryandimino posted a comment on discussion Engineering 🇬🇧

I'm trying to get the OPC server setup on my machine and currently I'm not having luck. I went ahead and got my license setup. However when I go to run WinCoDeSysOPC.exe I get an error message that I don't have the code meter licenses installed. Does anyone have any ideas on how I can fix this issue?